Streamingteacher ®

Streamingteacher would like to welcome Clackamas Community College to our Streamingteacher in the Classroom program!

Streamingteacher would like to welcome Monroe Career & Technical Institute to our Streamingteacher in the Classroom program!

Streamingteacher would like to welcome Clackamas Community College to our Streamingteacher in the Classroom program!

Our office will be closed from Dec 21st thru Dec 27th.  Voice messages left at the office will be returned Dec 28th.  Orders made through the website will be completed as usual.

Streamingteacher would like to welcome Lewis and Clark State College to our Streamingteacher in the Classroom program!

Streamingteacher would like to welcome Harvard University to our Streamingteacher in the Classroom program!

Streamingteacher now offers the new Mastercam X4 HLE (Home Learning Edition) software included with our Mastercam X4 courseware. The new HLE software is a timed software that will allow you to save files while you learn in Streamingteacher and work along side in Mastercam.

12 new videos and projects have just been added to our Mastercam X4 courseware.

Available NOW!
Streamingteacher’s Tech Tips for Mastercam

A complimentary channel with tips for installation, configuration and customization for Mastercam X4.

Start training now for the most current version of CNC Softwares Mastercam software - X4! 

All current subscribers of our Mastercam X3 courseware have received a free subscription to our Mastercam X4 courseware that will last for the duration of their X3 subscription. (This does not apply to our X3 Mill Certification courseware). 

Not only does our homepage have a fresh new look ... subscribers to Art, v9 and X channels have been upgraded to the New Streamingteacher Table of Contents format.

Coming Soon: Mastercam X4 Courseware. All subscribers with an active X3 subscription will get a FREE subscription to our Mastercam X4 courseware that lasts for the duration of their X3 subscription. This offer is for a limited time only and does not apply to Certification courseware.

Register for the new Streamingteacher user forum by clicking on the "Forum" link above. On the Forum you can ask other users questions about Streamingteacher or Mastercam. You must be a Streamingteacher subscriber to register.

All subscribers with an active X3, X2, X or v9 subscription can now renew their subscription with a 15% discount. This one time discount will apply to all subscription renewals and new subscriptions purchased thru the "Renew with Discount" link found on your User Account page. This discount offer is only good while your current subscription is active and the option disappears when your subscription expires.

This discount does not apply to Streamingteacher Certification for Mastercam classes or Streamingteacher in the Classroom packages.

8 new videos have been added to our Mastercam X3 courseware that cover Machine Definition, Control Definition and Posts.

Our phone lines may be down for a few hours on Friday November 14, 2008 while we make the transition, if you have any questions or problems please feel free to email us at support. We will be back to business as usual on Monday November 17th.

Note: this will not affect your ability to access your existing subscriptions or place orders for new subscriptions.

Welcome Lewis & Clark State College Students!

Streamingteacher has added a new "Instructors" tab to each of our courseware landing pages. Now you can see photos of each of our instructors and learn a little about their backgrounds and experience.

We have added 7 new videos for Mastercam X3 Art to our complimentary Art channel.

We have added 2 new introduction videos to the X3, X2 and Certification Coursewares; See the Revision logs for details.

Now Available: Mastercam Art X3 videos have been added to the X3 Courseware.

We have added multiple new videos for Router, Lathe, Solids and Importing & Exporting to the X3 Courseware; and two new videos to the Solids and Importing & Exporting lessons in the X2 and Certification Courseware. See the Revision logs for details.

Art X3 Videos Coming soon!

Welcome Monroe Career & Technology Institute Students!

The new site contains many features that make finding the right courseware easier and faster.

Streamingteacher was built and optimized for Mozilla Firefox and Internet Explorer 7. We realize many of you use IE 6 and other browsers so we ask that you notify us at support@streamingteacher.com if you encounter a bug or display problem. Please be as descriptive as possible and include your browser name and version or a screenshot.

Thank you for your support and help as we work to create a better streaming experience for you.

Start training now for the most current version of CNC Softwares Mastercam software - X3! 

All current subscribers of our Mastercam X2 courseware will receive a free subscription to our Mastercam X3 courseware that will last for the duration of their X2 subscription. (This does not apply to our X2 Mill Certification courseware). 

When Mastercam X3 releases, X2 subscribers receive a free Mastercam X3 subscription good for the duration of their X2 subscription.

Four new videos added to the X2 Courseware.  See the Revision Log for details.

New Workshop Video Series video added to the Mastercam X2 Courseware. See the Revision Log for details.

Two (2) new videos added to the X2 Workshop Video Series.  See the Revision Log for details. Streamingteacher Certification for Mastercam X2 Mill now available!

Streamingteacher Certification for Mastercam X2 Mill now available. Click on the Certification button for more information.

Two (2) videos added to the Solid Modeling Lesson on the "Boolean Remove Function" and the "Solid Find Features Function" in the Mastercam X2 courseware.  See the Revision Log for details.

New Solid Shell Function video added to the Solid Modeling Lesson in the Mastercam X2 courseware. See the Revision Log for details.

Three (3) new videos added to the Mastercam X2 courseware. See the Revision Log for details.